Posted 10/16/2006 23:46 (#52241 - in reply to #52230) Subject: RE: Are You Sure About That?
Huntley Montana
Tighten the "push" bolts, about 2-300 FT #, THEN with a BFH (10-15#) give the end of the axel 2-3 good solid sharp whacks, (kinda like what we all would like to give certain folks) then retighten the "push" bolts. Repeat as needed A little KROILs will help if administrated the night befor in the space between the wedges.
JD rack and pinion axle
