Phil Yes-wireless..mostly. This is 1st yr for these wireless. I got them from Ron Jansen https://secure.surfsglobal.com/cgi-bin/store/scstore.pl?action=search&pagename=jansene&category=Agriculture%20Systems He was @ Louisville in '06 w/a booth. Very good person to work with..business seems to be growing. The photo below shows the monitor screen mounted in the combine. You can see buttons 1-4 on lower right side of monitor. That selects cameras you want to monitor. Cameras & monitor have "dip switches" to adjust channels. For instance, you can't have 2x Channel 1 cameras within range of each other. You can push buttons to scan 2-3-4 channels, or just stay on one. This photo from the combine is for the 5th channel. This is a WIRED camera. They're a little cheaper. I mounted ours IN the grain tank so driver can see actual pile. On the cart we have camera mounted on rear for safety and 1 mounted on side so driver can see into truck/wagon. Combine driver could watch the same if he wanted. The cameras will transmit about 3-500' if there's no steel to go thru. Sometimes they'll go 1/4 mis when conditions are right. Operating under power lines can hammer the picture though. But, all in all, we're happy. 
Edited by Ron..NE ILL..10/48 10/17/2006 20:21
| 
Is anyone using a JD w/IVT on grain cart?
