Wi | thedodd - 12/19/2019 06:29
I recently did a setup and was going to use the in the box Poe injector for a NS5AC and use the pass through for an UVC-G3-Bullet as they are now named. The injector in the box with the 5AC was only .5 amp and could not boot the camera on passthrough. I had to order a higher amp injector to do the trick. Haven’t check the amp rating for the APs but he may have to upgrade his injector also for this depending on his AP of choice.
That's odd, it's one of the reccomended uses. The bullet is rated at 4W, station at 7W. Claims they ship with 12W injector. I run a G3-Pro through one fine and it draws 3x the power of a G3 Bullet but maybe that nano came with a 24W injector. |