|
SESD | Giving myself a headache today. Hooked up the spreader(new leader 3030) behind the tractor. Last year was the first time I used this rig. I remember I had this problem when I was getting it going last year, and of course I can't for the life of me remember what the solution was. When I turn on the hydraulics (one set of hoses run belt and spinners), the spinners will only run about 220rpm. They are set for 600. The belt will not run when I try to apply, nor will the integra show that I am applying. When I do a static calibration, the belt will turn just fine, but the spinners still sit at 220ish. I remember that the solution was something like a "well, duh" thing. Any ideas? | |
|