|
Southern Illinois | Just a thought but maybe your nav has an internal issue with the inertial sensor.
I have hooked displays up to the NAV 2 output NMEA serial before and it worked without that kind of issue. The Pro700 reads the gps from the CAN at 1 hz while the NAV is connected to both the CAN A and the TSIP serial port A. So obviously your receiver isn't putting out crazy changes in heading values since you are using the serial port B or port C in the B connector. This points to the inertial adjustment made 8n the NAV. | |
|
Pro700 GPS to Viper 4
