Bought a cheap Android Lenova tablet from Best Buy and a Larsen wifi camera from Larsen Lights. Camera needs power to operate so tied it into light circuit on combine to avoid running new power feed. Turn on lights and camera powers up. Connect with tablet using Cam Hi app suggested by Larsen. I think other apps will work too. Had a bit of an issue getting connections made with Cam Hi but got it accomplished. There is a slight delay in video from what is happening. Not a problem except when filling truck you need to be aware of this. I needed to be able to see far side of truck when filling across side ditch. Tied into light on unloading auger to eliminate running a long power cord around auger swivel and clear to other side of machine to firewall. Maybe not the best as it takes a little bit to power up but I don't need this for every dump. Install and bracket https://talk.newagtalk.com/forums/thread-view.asp?tid=950471 Tablet for viewing discussion https://talk.newagtalk.com/forums/thread-view.asp?tid=951820 Tablet set up and a couple pictures from camera illustrating what I needed to see. https://talk.newagtalk.com/forums/thread-view.asp?tid=954973 Video footage https://photos.imageevent.com/vprb/6620unloadingaugeripcam/Unloading%20Beans.mp4 All the above came from this thread https://talk.newagtalk.com/forums/thread-view.asp?tid=958309 Hope this helps. |