|
Hertford, NC | I am somewhat illiterate at the more advanced aspects of setting up a FMX to use CORS data via a cell phone.
What I have now
Android phone running Lance’s app (NTRIP Client)
Logon credentials for NC CORS network
Parani sd1000
Cable to connect serial 232 adapter to port C or D from known supplier
FMX unlocked to RTK
What’s currently showing
NTRIP client shows bytes accumulating and the data stream is set to VRS_CMRx
Bluetooth is connected from phone to Parani
Parani has blinking “connect” and “rs232Tx/Rx” lights blinking the dip switches are set for 38.4K and the lower one is off
FMX is set to RTX and in ag remote, port C has been set to I=CMR 38K4 and 8N1 O= NMEA 38K4.
FMX is showing set to RTX but status is only DGPS.
Where is my log jam for getting this data to flow? I’ve tried ports C and D and every different data type supported and nothing. Also, I’ve tried using GPS position source from the Trimble and that isn’t reaching the phone so I’m having to use the android gps position for CORS network. | |
|
Trouble getting CORS data into FMX via Lance’s NTRIP app
