AgTalk Home
AgTalk Home
Search Forums | Classifieds (76) | Skins | Language
You are logged in as a guest. ( logon | register )

0
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
Greywolf
Posted 11/7/2006 07:15 (#58812 - in reply to #58597)
Subject: Re: Pic of another Pete.



Aberdeen MS
I don't have any of the inside, but here's one of the outside rich. 88 377 with a 3406B with a 13. 3.55's and standard 22.5 rubber. The kitty has been worked a little bit from the previous owner, she'll scream out to 2600 if ya want. Speedo buries just a tad after 2100 tho.

It too could use a tiny bit of TLC on the outside. Went way too long on the TLC of the mechanicals and getting that taken care of this winter. Clutch and a couple suspension bushings and a tuneup is all that's left now (man that $98/hr shop rate kills a guy).

Anywho, a short 750,000 on the frame... 125K on the Kitty and the back rear. After the above is done mechanically, I'd take her anywhere a load needed to go as well. But I gave up the road 15 yrs ago, not interested in returning.



(Pete1.JPG)



Attachments
----------------
Attachments Pete1.JPG (64KB - 127 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)