NE South Dakota Clark, SD | Hello All. I have setup numerous 372's using external radios and feeding them RTCM RTK corrections on port B or C. I am trying to do the same with a NAV 900 receiver that is feeding GPS to a Pro 700 and electric steer. I have cable 4 and 5 plugged into the right side of the 900 per the pic below. I have tried port A and B as I RTCM 115K O 8N1 NMEA 115K. This works perfect on 372's. I cannot find any manual referring to using the 900 with
Pro 700 and electric steer with info about the RDI screen to access the receiver settings. Any help would be appreciated.
 (NAV 900-Ext Radio (full).jpg)
Attachments
----------------
 NAV 900-Ext Radio (full).jpg (97KB - 86 downloads)
|
NAV 900 RTK External Radio RTCM problem
