Jeffersonville, OH | MIsparky - 2/5/2024 15:22
I am currently running the original gta monitor to monitor and control the hyd drive on the planter. Last spring I had a few glitches with the gta that leads me to believe it's not long for the world. What are some inexpensive options for monitors to handle this. I currently have a fm750 for steering but I understand that these are no longer supported by trimble.
Any REAL ISO display would run that without issue. I have them running on Greenstar 4 displays, AGCO C2000/GTA, C3000, GTA1, and Datatronics 4 and 5 displays, Ag Leader Incommand and Integra displays, etc
I have never had any luck running them off most Trimble displays, but have never tried anything newer than an FMX. Not much Trimble around here.
If all you are doing is straight rate stuff, no big deal on about any monitor...if you want variable rate, then I would tell you to figure out what has good support in your area, and go that route.
Do you have a GTA1 or GTA2 display now? 6" screen or 10" screen?
Chris |
Monitor to control white 8524 planter
