|
| Using a Quadtrac 435 that has an EZ guide 500, ag25 antenna controlling a nav2 for steering. Works fine for field work, straight as an arrow. Using an Agleader integra, and 2500 receiver on the plow with a base in the field.
I can go out set A-B line and survey several lines, go back and start tiling, but a lot of times I can't use the auto steering from EZ guide because of waas drift. Could adjust lines, but sometimes they drift more at one end more than the other. Not a big issue, have my previous tracks, I can steer it, but was wondering if there might be some solution, would be nice if I could get RTK into the tractor, but don't know if that would be economically feasible ? | |
|
Quadtrac guidance while tiling
