|
East central Indiana | I run teejet gps for the matrix 570 to control sections you would need a teejet boom pilot and cabling to hook into rate controller. If you do not have a boom pilot box then cable from matrix to 440 is probably speed cable telling raven 440 how fast you are going. Wiring is different on a raven 440 compared to teejet rate controller. The matrix 570 is a good easy to use guidance system and I still own it. I own a newer teejet 908 and there are days I am ready to remove it and put 570 back in. The 570 just was simple. The teejet boom pilot system is setup to turn off and on section control when by one click of screen this is very helpful on outside pass or in places you can’t use all boom sections. If you do an internet search you look up teejet 90-02667 will be boompilot kit to go between matrix and raven controller.
Edited by smokin deere 3/13/2024 21:51
| |
|
Any teejet experts on here?
