|
WC Iowa | Gen 5 display, 7000 receiver, 7730 tractor. Autotrac engages and drives perfectly straight however it is always 3 ft off to the right of the line. Offset is set to zero. What is puzzling is changing the offset has absolutely zero effect on the distance off line.
Dealer tried a 4640 display with a 6000 receiver with exact same results. They opened a case with Deere who says it should work and is not giving them much for help other than to run calibrations again.
Previous owner of tractor used a 2630 display and said everything worked perfectly.
Anyone here running the new gen displays on 30 series? Software update needed on tractor for new displays?
Trying to find a 2600 or 2630 to confirm it works with the older displays....
| |
|