|
Quebec, Canada | Here is a setup guide for the adapter harness that connects the FieldView Drive to an Envizio Pro. The cable required is a little different depending on if you have an internal or external GPS receiver. Page one of the setup guide shows how to check in the Envizio monitor.
https://eng1e.seismic.com/i/duMdS4uZzAhIUwOSegUWPfKGu9qZIyGM9yrSnmmz...
For an external receiver you would want the cc1034k kit (the sticker on the adapter wiring says cc1023) and an actisense converter. If you have an internal receiver you would want an actisense converter and the cc1098k kit (2 wiring harnesses, one labeled cc1023 and the other cc1097)
The harnesses don’t really go bad sitting in a cab so if redbloodedfarmboy has the one(s) you need then buying used is a great option. | |
|
Fieldview access with EnvisioPro?
