|
Hennepin, IL | Try the newest firmware first. Probably won't make a difference but could. If it still does this go to the wrench (bear with me as I know the Compass is laid out different), then there should be a wrench next to the receiver. Then on the general tab there should be a drop down for differential source with a wrench next to it. Hit that wrench and there should be a drop down for PRN. By default it's on automatic. I've had 6000s act wonky until you switch it from auto to 1 satellite. Try setting it to 135 and see how that works. | |
|
Signal lost / signal degraded (too often!)
