|
Lakeville, MN | I am setting up a new tile plow control system with a TMX-2050 unlocked with WM-Drain. I planned to import NEMA GPS to make use of the 372 RTK receivers I have. My plan was to use 2 exp-100's to bring in NEMA from the tractors nav 2 for manual guidance to use the 372 on the tractor to do the survey. Then use the second exp-100 to Import the NEMA from the 372 I have mounted on the plow. I can set this all up and it all works except I have an IMD 600 for pitch and tilt that as soon as I switch the GPS receiver for the WM-Drain implement away from the TM200 internal receiver it knocks the IMD 600 off line. I am running FW 11.24 This should just work what am I doing wrong? | |
|