|
| I have a c232 that will not crank. I have checked every fuse, including the 60 amp in the engine bay, key switch & relays, everything was good. Replaced the battery. The ecm is under the cab & I can't raise the boom so I can't see it yet. Any help would be greatly appreciated. I am getting a 1051 code & ! In a triangle. Before it quit the original problem was it would run and die & had to be restarted regularly after 5-15 minutes of running. The starter will crank if I put 12 volts directly to the solenoid but it does not start. The 7.5 & 20 amp fuses for the ecm have no power to them.
Edited by W.f.pope 3/28/2024 18:54
| |
|
New holland c232 skid steer code 1051 won't crank
