|
| I’ve looked up some posts about this but the solutions don’t work. For starters, raven system on a Deere rate controller. refurbished system, new flow meter, cooler rebuilt, screens clean, vapor tubes clear, etc.
But the rate jumps from 30 to 400. I disconnected the control vale to have it partially open and was able to drive and just change the speed to match the rate.
I tried a new harness and back and forth up and down. Only thing I’m gonna try in the morning is try a different rate controller.
Anyone want to throw me a bone? What else to check?
| |
|
NH3 Control Valve hunting
