| mindeere - 4/10/2024 19:15
We seem to have a bunch of problems. Settling being the main culprit and not in the phasing valves. When to change check valves and now can’t hold oil at any of those ports. I have other ports constantly seeping oil like oil is getting where it shouldn’t/relief valve isn’t doing its job. Not sure. Beyond frustrated.
Ours when it settles acts like one set of transports want to maybe continue to raise while the other one is forced down. It can get pretty wonky.
Not sure what tractor you're using to pull the planter with, but if you're using an R series it does help to set the SCV to shut off after picking up vs a constant detent like what is needed while down and planting. It doesn't fix the issue but it does help from it getting as wonky when it is raised up sitting still. Seems like it as helped on the amount of O Rings that we blow also, used to be a couple a year and has gone down to maybe one every other.
Austin |
1790 Salvage parts
