Posted 4/17/2024 22:53 (#10710862) Subject: Question on disassembly of John Deere vac motor.
Se Nebraska
I had a John Deere AA66288 vac motor that the impeller kinda broke up in and I assume it took the bearing out of the motor. It doesn’t leak but has a lot of shaft play. I found old posts on here where to get a kit from agco for the bearings. My question is how to disassemble it. I took out the snap ring and that’s as far as I got. It’s on a 1760 planter but I assume it fits others as well. Thanks
Question on disassembly of John Deere vac motor.
