|
East Central, Nebraska | im not sure i am following you completely but we are seeing lots of problems with machines running on waas. back in the day it could just pick the sats it wanted automatically and roll with it but now we are forced to just look at 135. we were seeing lots of issues getting it to pick anything up at startup so i guess trimble won as we just put a rangepoint subscription on our machine. ive been seeing posts elsewhere with others having the same problems. things are definitely acting screwy, as for why i am not sure. problems i was having was on a tmx. i about changed out the ag25 but then tried rangpoint and we have been running. not to mention also when it would work on sbas/autonomous it was way way off in a short amount of time. i will attach a picture.
as for changing should be as simple as the pulldown menu and select whatever source your wanting.
Edited by caseihfarmer 4/20/2024 13:40
 (IMG_3347 (full).jpeg)
Attachments
----------------
 IMG_3347 (full).jpeg (134KB - 7 downloads)
| |
|
Fmx rtk to sbas/autonomous
