|
NE Nebraska | Supply pressure should be 26-2800 on that tractor.
Which outlet are you trying to use? On our 9320 with high flow hydraulics, #4 and 5 are more for flow and 1-3 are for raising and lowering, fold, markers.
What size of hose to the lift manifold? I’m guessing a 36 row would need 5/8-3/4” just for the delta-force and alternator.
If you are tying the deere compressor into the pressure and return lines going between row units, those are only 3/8” lines and your compressor probably has 1/2” lines from the factory. On a 16 row planter how you have everything plumbed would probably work. On a 36 row I think you’re pushing the limits.
If this has worked before and is causing problems this season start looking for a restriction somewhere. Filters on tractor, pinched hose on frame, etc. Good luck | |
|
Deere 9330 and deltaforce low hyd pressure
