|
| My sprayer CASE SPX3330 is equipped with Ag Leader with an external wheel angle sensor. At the same time, there is an internal sensor with 3 wires on the right steering cylinder this lable "auto guidance steering sensor". I tried to connect an internal sensor instead of the aglider sensor - in this case, there is a voltage of 3.6 volts at the signal output of the sensor, regardless of the position of the hydraulic cylinder rod. How can I use an internal sensor with an AgLeader ? Maybe it is necessary to use some other inputs on the SCM? | |
|
CASE SPX3330 with internal WAS and AgLeader
