Posted 9/24/2007 15:23 (#208779 - in reply to #208580) Subject: Re: greenstar set up/ mapping
Redfield, SD
Okay. You will still need the harness that goes to the Light switch from that bundle. Also get a PF90277 harness so it is easier to connect your Outback receiver to the Greenstar processor. Turn the GGA, RMC, and GSA NMEA strings to on, on your receiver, set the baud rate to 4800 and the update rate to 1 Hz. Harvest Doc or Yield Mapping?
Hope this helps
greenstar set up/ mapping
