|
NEWTON, IL (SE IL.) | Make sure you are on SP2 (radar)
What kind of system are you running? Are you using solenoid type of shut-offs? You may have an excessive voltage draw if so. These consoles are very sensitive to low voltage. Also be sure you've got a good ground. Have seen where the entire system was using the radar for ground.
If you're running an NH3 system, I'd be looking at the ground.
I had a short in the flowmeter circuit cause speed to act up. Took a long time to catch, cause we were always blaming the speed. Still could be the speed though.
I really hate trying to diagnose these kind of problems. Why can't the dang thing completely quit so you can find the problem!!!!
Do you have another console you could try also? | |
|
Raven 450 problems
