Viewing a thread - what refectors/reflective tape needed on 10-wheeler

You are logged in as a guest. ( logon | register )

what refectors/reflective tape needed on 10-wheeler	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Posted 1/16/2008 22:25 (#284905 - in reply to #284840)
Subject: Re: what refectors/reflective tape needed on 10-wheeler

SW North Dakota

For the Reflectors and Lights. 393.11 http://www.fmcsa.dot.gov/rules-regulations/administration/fmcsr/fmc...
A chart partway down tells the locations, of each. Has Footnotes, and some illustrations at the bottom.

For the Reflective tape. Part 393.13 http://www.fmcsa.dot.gov/rules-regulations/administration/fmcsr/fmc...
Basically says, tape needs to be at least 1/2 of the surface if not running continuous. On sides and rear. With white at the top box corners 12" long 2 pieces per corner.

(Delete cookies)