|
Grandfield, Ok. | On big cam IV there is very little room in the tubes for water flow., Water comes in at the bottom and goes out the bottom, making a complete round. Pull the bottom hose connection off and see if the divider plate has fell down. On some the divider is at the top. Flush backwards on both sides to remove anything in the tubes. Also check the screen coming out of the themostats going to the intercooler as this will stop up and cause problems. DO NOT PUT A FEEDLOT CORE IN AS THIS IS A TRAIN WRECK. Dealer said thermostats are 58.00plus about 2 minutes ago. Big cam 4s can cause lots of grief, was glad to see mine go last week. DO NOT USE STOP LEAK of any kind. good luck | |
|
Cummins Big Cam IV Heating problems
