|
Lincoln, NE | Made for Inspire - but much also applies to Phantom.
An older video (but still good to watch) - some changes made since this video was made. May not apply specifically to the Phantom series - but many do.
Proper IMU calibration is critical - see this section for sure. This process must be done on a LEVEL surface WITHOUT ANY machine movement.
Know what the right-hand IMU MOD numbers should be.
My advice - KNOW every option/setting, on every sub menu, of each main menu, of EACH page.
Video Is Here:
https://www.youtube.com/watch?v=SwInBUFtGqo
| |
|