|
| First it was no camera.
Second it said to download firmware.
Third the firmware was downloaded on the computer , not the RC.
Fourth got it to download on RC with help from grandson LOL.
Fifth still would not start motors and finally got emails from DJI to watch video.
Sixth downloaded it on the computer and was told to download on Drone which I did and still did nothing.
Today got up and decided to try one more time and turned everything on and the Drone started to flash green, yellow and red and it must have started to
download to the drone , and after 20 minutes or so I tried the motor and off it went.
So in the end maybe I just did not know how to download as I do not play with it all the time, but if you get a good teacher they will get you through it.
| |
|
Phantom 3 problem
