Near Intersection of I-35 & I-90 Southern Mn. | Yes, the correct answer is NO.
In harvest situations, the yield monitor will log only when certain conditions are met. One of these conditions is that the elevator is running above 200 RPM.
For all harvest situations the answer is NO because the elevator speed should be above 200 RPM.
I used my combine to map some tile lines once. I then set the answer to YES because I wanted to "record without grain flow" for this mapping project.
You will want to be certain that the "Log to Card" question is turned on. On the Ag Leader monitors there is a flashing arrow indicating each time that a reading is recorded to the card. I assume the AFS system is similar. This is to confirm that the card is being utilized.
|