|
roaming | Look for a 4-pin Deutsch connector on the front wall of the grain tank. This is where to connect a CAN-capable New Holland receiver. There is a similar connector behind the data logger unit in the headliner, if he's using the NH134 receiver that mounts in the headliner.
Can't use serial GPS with this machine unless the display and DLU have been updated to the latest firmware, which allows the Farm/Field/Load structure instead of the older Job structure. To add serial GPS (assuming you have the FFL data structure), you have to hardwire into the 8-pin DLU connector. | |
|
New Holland Yield Monitor
