Nth New South Wales Australia | I have been running a similar setup for many years and have not had the problem with pressure buildup and we do live in a hot climate.I would have thought that after shutting down pump and closing tank valve a quick triggering of the nozzle would allow any residual pressure to release.Also you must have very good sealing on all the joins as our set-up has little seeps that are only dust attracting not wasteful that would I'm sure allow pressure to release when temps heat up.Mike.
(DSCN1076.JPG)
(DSCN1077.JPG)
Attachments ---------------- DSCN1076.JPG (91KB - 140 downloads) DSCN1077.JPG (93KB - 124 downloads)
|