|
Edmonton, Alberta | Could someone please give me the required parts (and numbers) for moving my 2600, ATU and starfire to my spra-coupe. I believe I will need:
1) quick attach bracket for the roof
2) harness from starfire to 2600
3) harness to supply power
4) antirotation bracket and bushing
I can use the cable from my install in my 9760 for the patch between ATU and 2600. Not sure if I will use starfire for speed on the Raven controller, but can run a single wire if need be after. Thanks in advance. | |
|
GS2 Harness for Non JD Sprayer
