Posted 2/22/2024 14:06 (#10635202 - in reply to #10619005) Subject: RE: Wiring simple John deere Gs3 2630 and Starfire 6000
I have a 2600 in my office and have the square plug with two pins in 8 and 14 going to a 12volt converter that is 50 amp. These two wires allow it to turn on and then it shuts right back off. What other wire do I need and where should it run to? The ground?
Wiring simple John deere Gs3 2630 and Starfire 6000
