|
East Central, Nebraska | you either had regular dickey john sensors OR you had a kpm2, both cant be true.
if your wiring harness on the planter is only 3 pin then you have muxbus sensors compatible with the KPM. if you want the good planter monitoring with all the features you need a STMM, new harness and new sensors. we have been told on here that the KPM can do some advanced seed tube monitoring but I have not seen this for myself.
if you have a big round plug with lots of pins (37 ish) then you have the dickey john sensors and need the Seed Tube Monitoring Module), which as explained above is a good thing but unfortunately the module you have wont work and will need replaced.
| |
|