|
Hennepin, IL | Ignore the OT3 for a minute. Start with the wheels straight and count the turns all the way left then all the way right. They should be real close to one another. Also you should be able to make those turns in roughly the same amount of time. If both directions take the same number of turns and the same amount of time, there's an issue with the ontrac. I'm guessing you'll find an issue with the tractor though. Put a steadysteer on our combine and got a similar popup. Turns out a steering cylinder was bypassing, but we didn't have a way of really knowing.
Edited by AVP_Matt 3/10/2024 21:49
| |
|
Ontrac 3 error
