Middlesex County, Ontario | NMEA strings would be something that a GPS monitor can output to something like a 20/20.
I'm looking for the RTCM messages that the TMX-2050 must receive from the base station.
RTCM3 is a start in the right direction. The messages required would be something like
1008 - Antenna Descriptor
1012- Extended L1&L2 GLONASS RTK Observables
1077 - GPS MSM7
1087 - GLONASS MSM7
1230 - GLONASS L1 and L2 Code-Phase Biases
The system will need a half dozen of these RTCM3 messages, the question is which ones? Does it use MSM4 or MSM7? Can it use 1006 or does it need 1008? Does it require any special characters in the antenna descriptor?
Edited by WildBuckwheat 3/18/2024 12:26
|
Trimble TMX2050 - which RTCM messages are required?
