|
| The position of base is a must 1005 or 1006
Trimble receiver needs also the 1008 Antenna Descriptor.
It is not reccommended to mix legacy 1004 (GPS) and 1012 (GLONASS) observables with Multiple Systen Messages 1077 (GPS) 1087 (GLONASS)
My NTRIP Caster on my base station in broadcasting:
on the MSM-type mountpoint messages: 1006(5), 1008(5), 1013(20), 1033(20), 1077(1), 1087(1), 1097(1), 1127(1), 1230(20)
The number in pharenhis is the interval that it is repeated.
And on legacy RTCM3 mountpoint I send messages: 1004(1), 1006(5), 1008(5), 1012(1), 1013(20), 1019(30), 1020(30), 1033(20), 1230(20)
1013 (=list of messages broadcasted) is not mandatory.
And 1019 and 1020 (=GPS and GLONASS) ephemeris data are also not mandatary as the reveiver is getting this data from the satellites that it is tracking.
More about messages: https://www.use-snip.com/kb/knowledge-base/rtcm-3-message-list/
Edited by Artic 3/18/2024 14:44
| |
|
Trimble TMX2050 - which RTCM messages are required?
