AgTalk Home
Search
Forums
|
Classifieds (130)
|
Skins
|
Language
You are logged in as a guest. (
logon
|
register
)
Trimble and New Leader spreader.
View previous thread
::
View next thread
Forums List
->
Precision Talk
Message format
Flat
Threaded
Nested
Fingers77
Posted
3/20/2024 21:58 (#10673286 - in reply to #10673270)
Subject:
RE: Trimble and New Leader spreader.
Why not just run it with the servo it's got?
The FMX "should" run it just fine... At least it runs our 3020G4 well.
It's just a setup box to change. Make sure servo is chosen.
If it acts really weird, swap the wires for the servo to see if there's a change.
Double check the encoder. If its the one they used to use
(Dickey John
) it'll be 360/rev.
Edited by Fingers77 3/20/2024 22:00
Trimble and New Leader spreader.
-
Bjp9130
: 3/19/2024 14:39
RE: Trimble and New Leader spreader.
-
Fingers77
: 3/19/2024 17:19
RE: Trimble and New Leader spreader.
-
Bjp9130
: 3/20/2024 21:42
RE: Trimble and New Leader spreader.
-
Fingers77
: 3/20/2024 21:58
RE: Trimble and New Leader spreader.
-
Bjp9130
: 3/21/2024 06:12
RE: Trimble and New Leader spreader.
-
Fingers77
: 3/21/2024 09:45
RE: Trimble and New Leader spreader.
-
JDdude
: 3/19/2024 17:23
RE: Trimble and New Leader spreader.
-
Bjp9130
: 3/20/2024 21:47
Jump to forum :
Forums List
----------------------
+ Machinery Talk
+ Where Can I find?????
+ Crop Talk
+ Stock Talk
+ AgTalk Cafe
+ Kitchen Table
+ Precision Talk
+ Drone Talk
+ Computer Talk
+ Market Talk
+ Test Forum
+ FAQ & Support
Search this forum
Printer friendly version
E-mail a link to this thread
(
Delete cookies
)