|
Southern Illinois | No the autoboom will be a raven standard one so it will not talk to an ISO display. You can buy an ISO bus autoboom node from raven though.
Raven has their own can bus messages for their own use only. Similar to how AgLeader does for non ISO modules also. The pro700/intelleview 4 was given the ability to see and communicate with the raven nodes originally for the caseih sprayers. There was a caseIH part number for the boom/speed and single product nodes but all the rest were standard raven parts. At the time the caseih sprayers had the product and boom speed as basic equipment. Then accuboom (section shut off), autoboom (height control) and autofold (for 120ft booms) were add ons. With that setup either the pro700 or a raven viperpro/viper4 would run the sprayer. The only difference was raven auto steer for viper and Trimble auto steer for pro700. | |
|