| gemarsh - 3/24/2024 19:53
I am planning on using turnpath this year, so I drove and made new boundaries that are correct.
Can I make a curved headland ab line off of one of the new boundary edges? In the field, setting in the cab, ready to plant the headland?
Yes. Use SmartPath. It will automatically create guidance lines from any existing boundary. Pull into the field and engage.
A guidance line is generated the correct distance from the boundary for your current implement.
i.e. - if you have a 60' planter, it will create a line 30' from the boundary.
There are options to offset the guidance line from the boundary as well.
This helps you account for implement overhang or if you simply want to move the implement away from the boundary edge a certain distance. |
New incommand 1200, new boundary edge
