|
Hendricks MN | Rethinking the real axle width you may want to put in the outside tire. Shouldn't make much differences as it's just used for the uturn function to make sure you stay inside the boundary.
Make sure you follow the instructions on screen when calibrating. You will have to drive back and forth on a line a couple of times. Helps to be close to the line when you engage autosteer.
You can drive one way in snow or mud then turn around and drive the other way, should be in the same track. If it's dry use some paint to mark where the outside of the tires are then turn around. | |
|
set up fjdynamics
