|
| Here's some pics of the lamb guards I made to go in Cobett waterers. I cut a hole in an old disc blade for the float to go through, then welded on some hangers made of 3/8 rod. The disc hangs a few inches below the water. I have not had these installed during real cold weather when the waterer freezes over.
Edited by Mark F 4/12/2024 13:06
 (20240227_152405[1] (full).jpg)
 (20240227_152433 (full).jpg)
 (20240227_152441 (full).jpg)
Attachments
----------------
 20240227_152405[1] (full).jpg (327KB - 40 downloads)
20240227_152433 (full).jpg (205KB - 40 downloads)
20240227_152441 (full).jpg (214KB - 43 downloads)
| |
|
Cobett lamb guards
