Posted 4/18/2024 11:37 (#10711418 - in reply to #10711115) Subject: RE: Steering sensor on top of kingpin CIH 215
Shelburne Ontario Canada
Thread it out . Brake clean from bottom up. The pin threads into the axle under steer pin bearing. Then down by ujoint there is a lock nut from bottom up. Red or blue lock tite for sure . They come loose then wiggle and steering wonders. U need to do the calibration asap before locktite sets ,as u might have to adjust the position of the hex head a few times till ur in the calibration window.
Steering sensor on top of kingpin CIH 215
