|
| Tested.
Seems that http://caster.centipede.fr:2101
starts streaming with just about any user password ok and you have to manually select the mountpoint.
Most of the streams there seem to mix legacy (1004 and 1012) observables messages with MSM messages 10X7,,, A lot of information.
So maybe you should use a higher bps than 9600 -> 38400.
Make also sure that flow controll is off.
Make also sure that RS232 pinc 3 (TX) goes to FMX D-plug pin 3 (RX).
There has also been some posts suggesting that the Station ID on FMX should be set to 250, but i do not know for sure.
Edited by Artic 4/23/2024 15:57
| |
|
trimble FMX setting with an NTRIP
