|
Oregon | I don't what you are running, and you probably know this already, but I noticed that the Deere cart motors on the 2023 carts were not plumbed to freewheel (Why?). So make certain you hook up your hoses to run the fan in the "Lower" SCV detent and then go to the "float" detent when you stop and NOT to the middle detent.
The reason I mention this even though most people know it already is because when the dealer techs set up a cart last fall, for some reason they had no idea and repeatedly hammered the fans to a dead stop - even though the instruction is all over the set up materials and the operator's manual.
Like I said, your system may be better plumbed.
edit to add a photo:
You might want the valve pictured to allow the motor to freewheel rather than hammer to a dead stop. This is from a Concord cart.
Edited by mschultz 4/25/2024 23:36
(Image 5 (full).jpeg)
Attachments ---------------- Image 5 (full).jpeg (58KB - 7 downloads)
| |
|