|
Central SD | Exactly Again! Dutch-that is exactly what I am going to do. Going to remove old Apex-install new-and pretend 07 is my first year. Do we need to worry about what might be on our GS2 displays. Is there anyway to start over with them too? Or do we just need to have a clean data card. I did some data logging with my 4720 in early December for Deere. Having irratic rate issues with my controller I think (haven't heard back from them either). They replumbed my machine from the pump back to the boom. This helped a little, but 5 GPA work is still bad. GS2 map looks like fruit stripe gum. All that while my brown display does not change from 5.0 GPA but PSI is all over the place. I must have a lemon, I've had rate-pressure problems from day one with this sprayer. | |
|
Apex 2007
