Viewing a thread - JD 4955 ---Change out front Hyd. Pump

Forums | Classifieds (74) | Skins | Language

You are logged in as a guest. ( logon | register )

JD 4955 ---Change out front Hyd. Pump	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Lil' Hoss

Posted 1/17/2008 15:30 (#285418 - in reply to #285205)
Subject: Re: JD 4955 ---Change out front Hyd. Pump

NESD

Jon is correct, you may need only to remove the piston plug and replace the o-ring and the sheath (white plastic ring) oil it liberally and install, if the shaft seal isn't leaking I would just try to replace the O-ring. The downside is that it is a lot of work to replace the one o-ring.

Edited by Lil' Hoss 1/17/2008 15:31

JD 4955 ---Change out front Hyd. Pump - sbark : 1/16/2008 19:24
- Re: JD 4955 ---Change out front Hyd. Pump - FactoryFarmer : 1/16/2008 20:01
  - Re: JD 4955 ---Change out front Hyd. Pump - sbark : 1/16/2008 22:34
- RE: JD 4955 ---Change out front Hyd. Pump - Jon : 1/16/2008 20:17
- Re: JD 4955 ---Change out front Hyd. Pump - FactoryFarmer : 1/16/2008 20:26
  - Slide front mini-section of frame fwd... - sbark : 1/16/2008 22:07
- RE: Which manual are you looking in? - Hawken Cougar : 1/16/2008 20:39
  - RE: Which manual are you looking in? - sbark : 1/16/2008 21:52
    - RE: Want to know which manuals are availabe? - Hawken Cougar : 1/16/2008 22:35
- RE: JD 4955 ---Change out front Hyd. Pump - TD15 : 1/16/2008 21:03
- Been there done that, 4 times - JK SCLA : 1/16/2008 22:05
  - Thnks much---a few ?'s - sbark : 1/16/2008 22:31
    - Re: JD 4955 ---Change out front Hyd. Pump - JK SCLA : 1/17/2008 07:45
      - Re: JD 4955 ---Change out front Hyd. Pump - sbark : 1/17/2008 09:01
        
        Re: JD 4955 ---Change out front Hyd. Pump - Jon : 1/17/2008 09:11
        
        Your saying - sbark : 1/17/2008 10:35
        
        Re: JD 4955 ---Change out front Hyd. Pump - Lil' Hoss : 1/17/2008 15:30

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)