|
| My stuff has pretty basic TeeJet/Spray Systems stuff on it but lots of folks seem to like Raven's gear. Replacement valves aren't terribly expensive if you're happy with the rest of the controller. Something fancy that'll change rates with your groundspeed would be nice if you can't spray at the same speed all the time. Getting out the calculator or pocketpc partway through a tank to figure out how much water or chemical you need to get the right rate for the next field is a pain. If you're going through a total refit then getting rid of the roller pump would be a good idea if you plan on spraying a lot of acres. Dropping pressure/agitation throughout the season is a bummer. | |
|
Field Sprayer
