|
IL | Thanks Ted. My flow of fluid lines will look kinda odd as where I am mounting it, there isn't much room. Supply will come from a trailing tank, via 1 1/2" , towards the front of the toolbar/tongue. Then will do a 180 with a couple of elbows to go into the flowmeter/control valv( flow running rearward), then a tee, where it will split into the 2 halves of the rows. ( a wishbone shape). They way this folds, this works best so to keep hoses from being kinked too easy.
1 1/2 supply to 1 1/2 meter/valve, down to 1" shutoff valves/ supply line to each side. | |
|
Raven flowmeter/reg valve mounts
